| Top |
MmGdbusOrgFreedesktopModemManager1MmGdbusOrgFreedesktopModemManager1 — Generated C code for the org.freedesktop.ModemManager1 D-Bus interface |
| gboolean | handle-inhibit-device | Run Last |
| gboolean | handle-report-kernel-event | Run Last |
| gboolean | handle-scan-devices | Run Last |
| gboolean | handle-set-logging | Run Last |
MmGdbusOrgFreedesktopModemManager1 is implemented by MmGdbusOrgFreedesktopModemManager1Proxy and MmGdbusOrgFreedesktopModemManager1Skeleton.
This section contains code for working with the org.freedesktop.ModemManager1 D-Bus interface in C.
gchar *
mm_gdbus_org_freedesktop_modem_manager1_dup_version
(MmGdbusOrgFreedesktopModemManager1 *object);
Gets a copy of the "Version" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_org_freedesktop_modem_manager1_get_version
(MmGdbusOrgFreedesktopModemManager1 *object);
Gets the value of the "Version" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_org_freedesktop_modem_manager1_dup_version() if on another thread.
[skip]
void mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices (MmGdbusOrgFreedesktopModemManager1 *proxy,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ScanDevices()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices_finish() to get the result of the operation.
See mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices_finish (MmGdbusOrgFreedesktopModemManager1 *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices_sync (MmGdbusOrgFreedesktopModemManager1 *proxy,GCancellable *cancellable,GError **error);
Synchronously invokes the ScanDevices()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_org_freedesktop_modem_manager1_call_scan_devices() for the asynchronous version of this method.
void mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device (MmGdbusOrgFreedesktopModemManager1 *proxy,const gchar *arg_uid,gboolean arg_inhibit,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the InhibitDevice()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device_finish() to get the result of the operation.
See mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device_finish (MmGdbusOrgFreedesktopModemManager1 *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device_sync (MmGdbusOrgFreedesktopModemManager1 *proxy,const gchar *arg_uid,gboolean arg_inhibit,GCancellable *cancellable,GError **error);
Synchronously invokes the InhibitDevice()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_org_freedesktop_modem_manager1_call_inhibit_device() for the asynchronous version of this method.
void mm_gdbus_org_freedesktop_modem_manager1_call_set_logging (MmGdbusOrgFreedesktopModemManager1 *proxy,const gchar *arg_level,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the SetLogging()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_org_freedesktop_modem_manager1_call_set_logging_finish() to get the result of the operation.
See mm_gdbus_org_freedesktop_modem_manager1_call_set_logging_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_set_logging_finish (MmGdbusOrgFreedesktopModemManager1 *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_org_freedesktop_modem_manager1_call_set_logging().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_set_logging_sync (MmGdbusOrgFreedesktopModemManager1 *proxy,const gchar *arg_level,GCancellable *cancellable,GError **error);
Synchronously invokes the SetLogging()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_org_freedesktop_modem_manager1_call_set_logging() for the asynchronous version of this method.
void mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event (MmGdbusOrgFreedesktopModemManager1 *proxy,GVariant *arg_properties,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ReportKernelEvent()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event_finish() to get the result of the operation.
See mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event_finish (MmGdbusOrgFreedesktopModemManager1 *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event_sync (MmGdbusOrgFreedesktopModemManager1 *proxy,GVariant *arg_properties,GCancellable *cancellable,GError **error);
Synchronously invokes the ReportKernelEvent()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_org_freedesktop_modem_manager1_call_report_kernel_event() for the asynchronous version of this method.
typedef struct _MmGdbusOrgFreedesktopModemManager1 MmGdbusOrgFreedesktopModemManager1;
Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.
struct MmGdbusOrgFreedesktopModemManager1Iface {
GTypeInterface parent_iface;
gboolean (*handle_inhibit_device) (
MmGdbusOrgFreedesktopModemManager1 *object,
GDBusMethodInvocation *invocation,
const gchar *arg_uid,
gboolean arg_inhibit);
gboolean (*handle_report_kernel_event) (
MmGdbusOrgFreedesktopModemManager1 *object,
GDBusMethodInvocation *invocation,
GVariant *arg_properties);
gboolean (*handle_scan_devices) (
MmGdbusOrgFreedesktopModemManager1 *object,
GDBusMethodInvocation *invocation);
gboolean (*handle_set_logging) (
MmGdbusOrgFreedesktopModemManager1 *object,
GDBusMethodInvocation *invocation,
const gchar *arg_level);
const gchar * (*get_version) (MmGdbusOrgFreedesktopModemManager1 *object);
};
Virtual table for the D-Bus interface org.freedesktop.ModemManager1.
The parent interface. |
||
Handler for the “handle-inhibit-device” signal. |
||
Handler for the “handle-report-kernel-event” signal. |
||
Handler for the “handle-scan-devices” signal. |
||
Handler for the “handle-set-logging” signal. |
||
Getter for the “version” property. |
“version” property “version” char *
Represents the D-Bus property "Version".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusOrgFreedesktopModemManager1
Flags: Read / Write
Default value: NULL
“handle-inhibit-device” signalgboolean user_function (MmGdbusOrgFreedesktopModemManager1 *object, GDBusMethodInvocation *invocation, char *arg_uid, gboolean arg_inhibit, gpointer user_data)
Signal emitted when a remote caller is invoking the InhibitDevice()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_org_freedesktop_modem_manager1_complete_inhibit_device() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
arg_uid |
Argument passed by remote caller. |
|
arg_inhibit |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-report-kernel-event” signalgboolean user_function (MmGdbusOrgFreedesktopModemManager1 *object, GDBusMethodInvocation *invocation, GVariant *arg_properties, gpointer user_data)
Signal emitted when a remote caller is invoking the ReportKernelEvent()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_org_freedesktop_modem_manager1_complete_report_kernel_event() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
arg_properties |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-scan-devices” signalgboolean user_function (MmGdbusOrgFreedesktopModemManager1 *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the ScanDevices()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_org_freedesktop_modem_manager1_complete_scan_devices() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-set-logging” signalgboolean user_function (MmGdbusOrgFreedesktopModemManager1 *object, GDBusMethodInvocation *invocation, char *arg_level, gpointer user_data)
Signal emitted when a remote caller is invoking the SetLogging()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_org_freedesktop_modem_manager1_complete_set_logging() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
arg_level |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last